Your shopping bag is empty
Go to the shopspi
3" Drop Indicator Contact Point Extensio
$9.38
3" Drop Indicator Contact Point Extension#4-48 Thread.
3" Long X 3/8" Shank Diam Single Point D
$67.97
3" Long X 3/8" Shank Diam Single Point Diamond Dresser3" Long X 3/8" Shank Diam.
3" Wide X 3" Deep X 4" High Granite Angl
$583.30
3" Wide X 3" Deep X 4" High Granite Angle Platestepped Plate, Flat Surface, Open End, Single Plate.
3/4 Carat Single Point Series 404 Diamon
$232.21
3/4 Carat Single Point Series 404 Diamond Tool2 Inch Long X 7/16 Inch Shank Diameter.
3/4 To 3" Cutting Diam, 3/8" Cutting Dep
$351.08
3/4 To 3" Cutting Diam, 3/8" Cutting Depth, 1/2" Diam Straight Shank, Circle Cutter And Trepanning Tool5mm Blade Shank Compatibility.
3/4 To 3" Cutting Diam, 3/8" Cutting Dep
$351.08
3/4 To 3" Cutting Diam, 3/8" Cutting Depth, 1/2" Diam Straight Shank, Circle Cutter And Trepanning Tool5mm Blade Shank Compatibility, 3 Flats.
3/4 To 3" Cutting Diam, 3/8" Cutting Dep
$289.02
3/4 To 3" Cutting Diam, 3/8" Cutting Depth, Circle Cutter & Trepanning Toolstraight Shank, 1/2" Shank Diam.
3/4 To 3" Cutting Diam, 3/8" Cutting Dep
$377.57
3/4 To 3" Cutting Diam, 3/8" Cutting Depth, 5/8" Diam Straight Shank, Circle Cutter And Trepanning Tool5mm Blade Shank Compatibility, Flatted.
3/4 To 4" Cutting Diam, 3/8" Cutting Dep
$619.33
3/4 To 4" Cutting Diam, 3/8" Cutting Depth, Circle Cutter & Trepanning Toolstraight Shank, 3/4" Shank Diam.
3/4 To 4" Cutting Diam, 3/8" Cutting Dep
$585.11
3/4 To 4" Cutting Diam, 3/8" Cutting Depth, 1" Diam Straight Shank, Circle Cutter And Trepanning Tool5mm Blade Shank Compatibility, Flatted.
3/4" Drop Indicator Contact Point Extens
$7.00
3/4" Drop Indicator Contact Point Extension#4-48 Thread.
3/8 Inch Shank Diameter, Drop Indicator
$312.93
3/8 Inch Shank Diameter, Drop Indicator Spindle Squarefor Use With Dial Indicators.
3/8 Inch Shank Diameter, Drop Indicator
$319.56
3/8 Inch Shank Diameter, Drop Indicator Spindle Squarefor Use With Dial Indicators.
3/8 Inch Shank Diameter, Drop Indicator
$327.34
3/8 Inch Shank Diameter, Drop Indicator Spindle Squarefor Use With Dial Indicators.
3/8 Inch Shank, Drop Indicator Spindle S
$305.30
3/8 Inch Shank, Drop Indicator Spindle Squarefor Use With All Machines.
30 Leaf, 4 To 42 Tpi Range, Steel Screw
$32.58
30 Leaf, 4 To 42 Tpi Range, Steel Screw Pitch Gage60° Thread Angle.
30 Leaf, 6 To 60 Tpi Range, Steel Screw
$32.58
30 Leaf, 6 To 60 Tpi Range, Steel Screw Pitch Gage60° Thread Angle.
30 To 50mm Inside Dial Caliper Gage0.01m
$983.17
30 To 50mm Inside Dial Caliper Gage0.01mm Graduation, 0.03mm Accuracy, 85mm Leg Length, 7mm Deep X 1.2mm Wide Groove, Ball Contact Points.
31mm Point Length, 4mm Point Diameter, E
$1,213.93
31mm Point Length, 4mm Point Diameter, Electronic Positioning Indicator0.01mm Accuracy, 0.01mm Resolution, Cr2032 Battery.
32 Piece, 0.001 To 0.03" Thick, Parallel
$84.15
32 Piece, 0.001 To 0.03" Thick, Parallel Feeler Gage Set12" Leaf Length, 1/2" Wide, High Carbon Steel.
35 Mm Groove Depth, 0 To 0.39 Inch, Ball
$1,016.23
35 Mm Groove Depth, 0 To 0.39 Inch, Ball/ball Outside Electronic Caliper Gage0.0002 Inch Resolution, 0.0008 Inch Accuracy, 0.0591 Inch Tip Diameter, 1.378 Inch Leg Length, 0.12 Inch Min Pipe Inside Diameter, Data Output, 1.5v Aaa Battery.
35 Mm Groove Depth, 0 To 0.39 Inch, Chis
$1,016.23
35 Mm Groove Depth, 0 To 0.39 Inch, Chisel/ball Outside Electronic Caliper Gage0.0002 Inch Resolution, 0.0008 Inch Accuracy, 0.0591 Inch Tip Diameter, 1.378 Inch Leg Length, 0.12 Inch Min Pipe Inside Diameter, Data Output, 1.5v Aaa Battery.
36" Oal, Accurate Up To 0.003", Anodized
$382.85
36" Oal, Accurate Up To 0.003", Anodized Caliper Extender1 Piece, For Use With 6" Dial, Vernier & Electronic Calipers.
3mm Ball Diam, Carbide, Ball Test Indica
$54.26
3mm Ball Diam, Carbide, Ball Test Indicator Contact Point0.497" Contact Point Length, Use With Tesa Test Indicators.
3mm Ball Diam, Carbide, Ball Test Indica
$56.99
3mm Ball Diam, Carbide, Ball Test Indicator Contact Point0.497" Contact Point Length, Use With Brown & Sharpe Test Indicators.